Meaning of the indicator lights on the 8-channel optical transceiver


Release time:

2025-05-16

After completing the optical transceiver installation project and ensuring there are no errors, turn on the device power, and the RUN indicator light will illuminate. No alarm lights should be illuminated during normal operation.

Meaning of the indicator lights on the 8-channel optical transceiver

About 8-channel optical transceiver Let's learn about the indicator light meanings.

8-channel optical transceiver Front panel as shown:

 

 

Meaning of indicator lights on the panel

LED Name Indicator Light Meaning Color Remarks
RUN When the device is powered on normally: On Green Device power-on indication
TST Invalid Green  
LOS When the link input signal is lost: On Red Link receive status indication
LOF When the link receive signal is out of step: On Red
ERR When the link receives a signal alarm: On Red
DA When the remote device alarms: On Yellow
LNK When the Ethernet is occupied: On Green Ethernet channel occupancy status indication
SB1~SB8 When the channel is occupied: On (or flashing) Green Sub-channel occupancy status indication
Note: A red light indicates a fault on this end device (including wiring faults).
A yellow light indicates a fault on the remote device (including wiring faults).
A green light only indicates the device's operating status and has no alarm meaning.

After completing the optical transceiver installation project and ensuring that there are no errors, turn on the device power, and the RUN indicator light will turn on. No alarm lights should be on during normal operation.

Through the above table, we can clearly understand the meaning of the indicator lights of the 8-channel optical transceiver and understand the working status of the optical transceiver. Those who purchased the ZMUX-08S optical transceiver can refer to the manual or this article.

Leave A Message


Fill in the message form and leave your contact information. Our staff will contact you within 24 hours (workdays).